ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Präparative chromatographische Enantiomerentrennung von synthetisch nützlichen cyclischen Acetalen

Preparative Chromatographic Resolution of Synthetically Useful Cyclic Acetals Racemic cyclic acetals derived from aldehydes and glycine, glycolic acid, thioglycolic acid, formylacetic acid, and acetoacetic acid (oxazolidinones 4 – 13 , dioxolanones 14 , 15 , oxathiolanone 16 , dioxinones 17 – 23 ) are resolved by preparative high-pressure liquid chromatography on silica gel coated with the polymer from N-acryloylphenylalanine ethyl ester (Chiraspher®). The separation factors α range from1,1 to 2,4. Use of a Prepbar®-chromatography system allows injection of several grams at a time. The enantiomeric acetals thus obtained are fully characterized. First application to amino-acid synthesis are mentioned.     

Practical asymmetric enzymatic reduction through discovery of a dehydrogenase-compatible biphasic reaction media

[reaction: see text] An enzyme-compatible biphasic reaction media for the asymmetric biocatalytic reduction of ketones with in situ cofactor regeneration has been developed. In this biphasic reaction media, which is advantageous for reactions at higher substrate concentrations, both enzymes (alcohol dehydrogenase and FDH from Candida boidinii) remain stable. The reductions with poorly water-soluble ketones were carried out at substrate concentrations of 10-200 mM, and the optically active (S)-alcohols were formed with moderate to good conversions and with up to >99% ee.     

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid

An on-line potentiometric sequential injection titration process analyser for the determination of acetic acid is proposed. A solution of 0.1 mol L(-1) sodium chloride is used as carrier. Titration is achieved by aspirating acetic acid samples between two strong base-zone volumes into a holding coil and by channelling the stack of well-defined zones with flow reversal through a reaction coil to a potentiometric sensor where the peak widths were measured. A linear relationship between peak width and logarithm of the acid concentration was obtained in the range 1-9 g/100 mL. Vinegar samples were analysed without any sample pre-treatment. The method has a relative standard deviation of 0.4% with a sample frequency of 28 samples per hour. The results revealed good agreement between the proposed sequential injection and an automated batch titration method.     

Catalysts for the living insertion polymerization of alkenes: access to new polyolefin architectures using Ziegler-Natta chemistry

Coordination-insertion polymerization systems have long been superior to their anionic, cationic, and radical polymerization counterparts with regard to stereochemical control. However, until five years ago, these metal-based insertion methods were inferior to ionic and radical mechanisms in the category of living polymerization, which is simply a polymerization that occurs with rapid initiation and negligible chain termination or transfer. In the last half decade, the living insertion polymerization of unactivated olefins has emerged as a powerful tool for the synthesis of new polymer architectures. Materials available today by this route range from simple homopolymers such as linear and branched polyethylene, to atactic or tactic poly(alpha-olefins), to end-functionalized polymers and block copolymers. This review article summarizes recent developments in this rapidly growing research area at the interface of synthetic and mechanistic organometallic chemistry, polymer chemistry, and materials science. While special emphasis is placed on polymer properties and novel polymeric architectures, most of which were inaccessible just a decade ago, important achievements with respect to ligand and catalyst design are also highlighted.     

Boron implantation in Si: Channeling effects studied by SIMS and simulation

The axial channeling behaviour of boron implants in <100>, <110> and <111> silicon wafers is investigated by SIMS. Large differences of channeling characteristics such as channeled projected range (the projected range of channeled ions or channeling peak) and the fraction of channeled to implanted ions are observed among the three major crystal orientations. Within the critical angle, the channeling behaviour is very sensitive to the incidence beam angle with respect to crystal orientations. SIMS measurements are performed at different positions along several critical directions over a whole wafer. Well channeled profiles with an incidence beam angle to crystal orientations of 0 ° are obtained for each ion implantation energy and orientation. The results are used to test various models of ion implantation by simulation. A 3-parameter model for electronic stopping power of boron in silicon was proposed.     

Synthesis of part of a proposed insulin second messenger glycosylinositol phosphate and the inner core of glycosylphosphatidylinositol anchors

Synthesis of 6-O-(2-amino-2-deoxy--D-glucopyranosyl)-D-myo-inositol 1-phosphate, an inner core structure found in various glycosylphosphatidylinositols, and the corresponding 1,2-cyclic phosphate, proposed as part of an insulin second messenger glycosylinositol phosphate, is described. Chirality in the inositol part of the molecule was achieved by the use of a known D-camphor acetal intermediate. The glycosylation used 4-O-allyl-2-azido-3,6-di-O-benzyl-2-deoxy--D-glucopyranosyl fluoride as glycosyl donor. The allyl group can be chemoselectively removed, opening a route to oligosaccharides bound to the 4-position of the glucosamine unit. The phosphorylation was accomplished by the phosphoramidate procedure.     

A novel technique to specifically analyze the secretome of cells and tissues

The secretome of cells and tissues may reflect a broad variety of pathological conditions and thus represents a rich source of biomarkers. The identity of secreted proteins, usually isolated from cell supernatants or body fluids, is hardly accessible by direct proteome analysis, because these proteins are often masked by high amounts of proteins actually not secreted by the investigated cells. Here, we present a novel method for the specific detection of proteins secreted by human tissue specimen as well as cultured cells and chose liver as a model. The method is based on the metabolic labelling of proteins synthesized during a limited incubation period. Then, the cell supernatant is filtered, precipitated, and subjected to two-dimensional gel electrophoresis. Whereas fluorography detected a large number of proteins derived from residual plasma and dead cells, the autoradiographs selectively displayed genuinely secreted proteins. We demonstrate the feasibility of this approach by means of the secretomes of the hepatocellular carcinoma-derived cell line HepG2 and human liver slices. The selective identification of cell- and tissue-specific protein secretion profiles may help to identify novel sets of biomarkers for wide clinical applications.     

Anomalous grazing incidence small-angle x-ray scattering studies of platinum nanoparticles formed by cluster deposition

The size evolution of platinum nanoparticles formed on a SiO2/Si(111) substrate as a function of the level of surface coverage with deposited clusters has been investigated. The anisotropic shapes of sub-nanometer-size nanoparticles are changed to isotropic on the amorphous substrate as their sizes increased. Using anomalous grazing incidence small-angle x-ray scattering (AGISAXS), the scattering from nanoparticles on the surface of a substrate is well separated from that of surface roughness and fluorescence. We show that AGISAXS is a very effective method to subtract the background and can provide unbiased information about particle sizes of less than 1 nm.     

Nordesferriferrithiocin. Comparative Coordination Chemistry of a Prospective Therapeutic Iron Chelating Agent(1)

Nordesferriferrithiocin, NDFFTH(2), is a derivative of the siderophore desferriferrithiocin, DFFTH(2), in which the methyl group is substituted by a hydrogen atom. Both compounds show high oral activity as possible drugs for the treatment of iron overload. While DFFTH(2) is significantly toxic, NDFFTH(2) exhibits a lower toxicity and offers a much better therapeutic window than other orally active iron chelators. In this study, complexes of DFFTH(2) and NDFFTH(2) with various trivalent metals have been synthesized and characterized. Five isomers (the maximum possible) have been observed in the case of [Co(DFFT)(2)](-) in solution, as proved by (1)H-NMR measurements. Although normally labile, complexes of Al(3+) ([Al(DFFT)(2)](-)) have been separated by HPLC. In general, DFFTH(2) forms kinetically inert complexes whereas complexes of NDFFTH(2) tend to isomerize quickly in solution, as indicated by CD spectroscopy of separated HPLC fractions of [Cr(NDFFT)(2)](-). The most stable isomers of the aluminum complexes of both ligands have been characterized by X-ray crystallography; K[Al(DFFT)(2)] crystallizes from methanol/diethyl ether in the orthorhombic space group P2(1)2(1)2 with a = 11.238(3) ?, b = 31.719(11) ?, c = 7.684(2) ?, V = 2739.2(24) ?(3), and Z = 4. This isomer has the mer-(N,O-Lambda)(S,S) configuration, while K[Al(NDFFT)(2)] crystallizes from methanol/diethyl ether in the space group P6(1) (a = 21.269(8) ?, c = 9.643(3) ?, V = 3777.8(42) ?(3), Z = 6) and has the same coordination geometry. The solution thermodynamics of the Al(3+), Ga(3+), and Fe(3+) complexes have been studied by spectrophotometric titration. The stability constants (log K) are 23.6(1), 29.2(3), and 31.04(3), respectively, for the DFFTH(2) complexes and 22.0(1), 27.8(2), and 29.09(3), respectively, for the NDFFTH(2) complexes. Cyclic voltammograms of both iron complexes have been recorded in water at a carbon disk working electrode and in DMF at a graphite working electrode. The reduction waves measured in DMF indicate no reversibility whereas in water a quasi-reversible reduction is observed. The reduction potentials (E(1/2)'s) in water are -166 mV for [Fe(DFFT)(2)](-) and -97 mV for [Fe(NDFFT)(2)](-) versus NHE. These potentials are well in the range for biological reductants, which makes possible an in vivo reduction mechanism for the iron removal from the siderophore.